ROS-0027 Technical Details

Electronic touchless tap ROS-0027

ROS Series: ROS-0027 stylish curve-neck design

Features

Ralph O'Wallaby Designer sensor tap
Stylish Goose-neck design
Solid brass construction design
Unique waterfall effect
Single supply
Mains/4XAA Alkaline batteries (2-Year lifespan)
Hands free infrared activation
Flexible supply hose

Different ways of controlling temperature

Special Notes:

Temperature control:

This sensor tap is designed to be supplied with pre-mixed water. Consideration should be given to safe hot water delivery and the use of an appropriate temperature reduction device.

A manual blending valve ABV-0012 or a thermostatic mixing valve ATV-0076 will be required if you want this model to regulate hot and cold temperature.

Water pressure:

Water pressure required: 0.5-1 Bar (1 bar or above for best performance)

Technical Details

Diameter of 'inlet' pipe: G1/2”
Diameter of 'inlet' pipe: G1/2”
Water pressure range: 0.5-1 Bar
Voltage: DC6V or AC220V-240V; 50/60HZ
Power consumption: =0.3MW
Sensing distance: 27-31cm
Respond time: 1 Second
Electricity Consumption: 4xAA alkaline batteries (2 years)
Silent Consumption: 0.003W
Environment Temperature: 1-45 C
AC+DC Power: This sensor tap can be powered by either Mains or battery or both (This means that in case of a power cut, it will automatically switch to battery)
Sensor tap base diameter: 45mm