ATX-8205 Technical Details

Sensor automatic tap ATX-8205

Tall swan-neck design kitchen mixer sensor tap

Features

Tall and elegant 'Goose neck' design sensor tap
Swivel neck (360 degree)
Pillar-type frame construction with advance sensor eye
Hygienic and upto 70% water conservation
Battery powered | 4XAA Alkaline batteries (*subject to availability)
Mains Operated (Dual powered)
Hands free and reliable infrared activation technology
Exquisite and stylish 'goose neck' design
Solid brass construction

Different ways of controlling temperature

Special Notes:

Temperature control:

This sensor tap is designed to be supplied with pre-mixed water. Consideration should be given to safe hot water delivery and the use of an appropriate temperature reduction device.

A manual blending valve ABV-0012 or a thermostatic mixing valve ATV-0076 will be required if you want this model to regulate hot and cold temperature.

Water pressure:

Water pressure range: 0.7 (Min) - 8 Bar (Max) (1 bar or above for best performance)

Technical Details

Diameter of 'inlet' pipe: G1/2”
Diameter of 'outlet' pipe: G1/2”
Water pressure range: 0.7 (Min) - 8 Bar (Max)
Voltage: DC6V or AC220V-240V (6V Output)
Power consumption: =0.3MW
Sensing distance: 10-31cm
Respond time: 1 Second
Battery Consumption (DC): 4xAA alkaline batteries (2 years lifespan depending on level of usage)
Silent Consumption: 0.003W
Environment Temperature: 1-45 C

Flow Rate: 4L/Per minute

Pipe Threading: British Standard Whitworth (BSW)

AC+DC Power: This sensor tap can be powered by either Mains or battery or both (This means that in case of a power cut, it will automatically switch to battery)

Quick Visual Data


This sensor tap can be powered by either Mains (AC) or Batteries (DC) or both	The control box for this sensor tap has a built-in transformer with 3-Pin UK plug attached to it.	This sensor tap comes with a single water supply feed	35mm

1x Sensor Tap
1x Control Box ***with 3-Pin plug (*battery compartment inside)
4x AA Alkaline Batteries (*Subject to availability: Batteries are supplied only if we have them in stock)
1x Flexible G1/2" *600mm Connection Hose
1x Transformer (*inside the control box)
Fittings and Screws