ATT-1103 Technical Details

Sensor tap ATT-1103

Swan neck design kitchen mixer tap with temperature control

Features

Stylish Swan-neck design sensor tap
360 degree swivel-neck design
Easy installation
Manual blending valve built-in
Manual temperature control lever
Hygienic and up to 70% water conservation
DC powered only: 1x 6v CR-P2 Lithium battery (already installed)
Hands-free reliable infrared activation technology
Exquisite and stylish design
Solid brass construction
2x flexible supply hoses

Note:

Gravity-fed water supply users:

You'll need at least 0.75 bar of equal pressure from hot and cold supply in order for this tap to work properly. A pressure pump/booster can be used to increase the water pressure. In summary, the pressure of 'hot' and 'cold' supply feeds must be equal for the temperature control to work efficiently.

Technical Details

Diameter of 'inlet' flexible hoses: G1/2”
Water pressure range: 0.7 (Min) - 8 Bar (Max)
Voltage: DC6V only
Power consumption: =0.3MW
Sensing distance: 10-27cm
Respond time: 1 Second
Electricity Consumption: 4xAA alkaline batteries (2 years lifespan depending on level of usage)
Silent Consumption: 0.003W
Environment Temperature: 1-45 C

Flow Rate: 4L/Per minute
DC Power ONLY: This sensor tap can only be powered by batteries.

Pipe Threading: British Standard Whitworth (BSW)

Downloadable Manual: ATT-1103 Manual

Quick Visual Data


This sensor tap can only be powered by Batteries (DC)	This sensor tap comes with double water supply feeds	35-38mm

1x Sensor Tap
1x 6v CR-P2 Lithium battery (already installed)
*** The battery is located inside the tap's body
2x Flexible G1/2" *500mm Connection Hoses
Fittings and Screws