AMA-5201 Technical Details

Sensor automatic tap AMA-5201

Short automatic and manual 2-in-1 combination tap

Features

2-in-1 Integrative design
Automatic or Manual water control system
2-Pipeline Design
Double water supply feeds
Swan-neck Design
Mains/4XAA Alkaline batteries (2-Year lifespan)
Low power indicator
Hands free infrared activation
Swivel-neck design
Solid-brass outer-shell construction

Finish: Chrome-plated
2x Flexible supply hoses

Note:

Gravity-fed water supply users:

You'll need at least 0.75 bar of equal pressure from both hot and cold supply in order for this tap to work properly. A pressure pump/booster can be used to increase the water pressure. In summary, the pressure of 'hot' and 'cold' supply feeds must be equal for the temperature control to work efficiently.

Technical Details

Dia. of Water Inlet Pipe: G1/2" (DN15)
Operating Pressure 0.05~0.7 Mpa
Flow Rate of Manual Mode: 16/Min (at 3 Bar)
Flow Rate of Automatic Mode: 12L/Min (at 3 Bar)
Max. Hot-water Temperature: 70C
Power consumption: =0.3MW
Respond time: 1 Second
Electricity Consumption: 4xAA alkaline batteries (2 years)
Silent Consumption: 0.003W
Environment Temperature: 1-45 C
Noise Class 1
Chrome Finish

1x Sensor tap
4x AA Alkaline Batteries
1x Battery Box
1x Multi-function Battery Bracket
2x Flexible G1/2" *500mm Connection Hose
1x Non-return Valves With Pre-filter
1x Amphibious Screwdriver
1x Non-Return Valve With Pre-Filter
1x Power Adapter (AC 110V~240V)

Dimension:

AMA-5201 technical details

Functions

Autotaps AMA-5201

Function Explanation

A

MANUAL MODE

Like a manual/conventional tap, this manually switch the tap ON and OFF. By turning the knob, from 'MIN' to 'MAX', it also increases or decreases the water flow rate as well.

B

AUTOMATIC MODE

This is the infra red sensor that controls or switches the water ON and OFF automatically.

C

TEMPERATURE CONTROL

By moving this temperature control lever forward or backwards, it manually adjust the temperature of the water according to user's preference.

NOTE:

There's no thermostatic valve/regulator built in, the temperature is controlled entirely by moving the lever to desired temperature as suited by the user (Just like a conventional/manual tap)

D

WATER FLOW RATE (Automatic mode)

When in automatic mode, water flow rate delivery is usually a 'gush' (depending on the water pressure coming from the hot and cold supplies), but this can be reduced or increased by turning it from 'MIN' to 'MAX' (or vice versa) according to user's preferences.